2019 State Bicycle Co. 4130 Fixed Gear / Single-Speed Base 52cm
Build
700C/29 in × 25 mm
Insights
Very upright stack and reach vs trend of track/fixed-gear bikes
Design deviates from other sizes of State Bicycle Co. 4130 Fixed Gear / Single-Speed
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 520mm |
| Reach | 372mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, C-T | 520mm |
| Top Tube Length, Effective/Horizontal Unknown | 517mm |
| Top Tube Length, Actual C-C | 515mm |
| Top Tube Slope | 2.2deg |
| Head Tube Angle | 71deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 105mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 276mm |
| Chainstay Length | 412mm |
| Chainstay Length Horizontal | 407.6mm |
| Front-Center | 583.5mm |
| Front-Center Horizontal | 580.4mm |
| Wheelbase | 988mm |
| Fork Offset/Rake | 45mm |
| Fork Length, Unknown | 402mm |
| Trail | 68.1mm high |
| Mechanical Trail | 64.4mm |
| Wheel Flop | 21mm |
| Standover Height | 759mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 77.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 106mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 25mm |
| Tire Outer Diameter | 672mm |
| Bike Length with Tires | 1660mm |
| Crank Length | 170mm |
| Handlebar Width | 57cm |
| Stem Length | 90mm |
| Stem Angle | 7deg |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Flat Bar |
| Frame Material | Steel |
| Fork Material | Steel |
| Brake Type | Rim |
Published Sizing Recommendations
| Height | 5 ft 4 in to 5 ft 7 in |
Source:https://www.statebicycle.com/blogs/size-and-spec-guides/4130-core-line-sizing-guide