2021 Norco Bicycles Revolver HT 3 120 S
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver HT
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 605mm |
| Reach | 422mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 425mm |
| Top Tube Length, Effective/Horizontal HT Top | 581mm |
| Top Tube Slope | 20.1deg |
| Head Tube Angle | 67.8deg |
| Seat Tube Angle | 75.3deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 54mm |
| Bottom Bracket Height | 316.7mm |
| Chainstay Length | 420mm |
| Chainstay Length Horizontal | 416.5mm |
| Front-Center | 705.6mm |
| Front-Center Horizontal | 703.5mm |
| Wheelbase | 1120mm |
| Fork Offset/Rake | 51mm |
| Trail | 96.2mm very high |
| Mechanical Trail | 89.1mm |
| Wheel Flop | 33.7mm |
| Standover Height | 675mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 159.9mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 141.7mm |
3 120 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1861.4mm |
| Crank Length | 175mm |
| Handlebar Width | 760mm |
| Stem Length | 60mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.norco.com/bikes/2021/mountain/xc-race/revolver-ht/revolver-ht-3-120/