2021 Salsa Cycles Cassidy Carbon 29" 180mm (flip chip low) SM
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 617mm |
| Reach | 439mm |
| Stack to Reach Ratio | 1.41:1 |
| Seat Tube Length, C-T | 405mm |
| Top Tube Length, Effective/Horizontal HT Top | 596mm |
| Head Tube Angle | 63.8deg |
| Effective Seat Tube Angle, ETT HT Top | 75.7deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 19mm |
| Bottom Bracket Height | 353mm |
| Chainstay Length | 432mm |
| Chainstay Length Horizontal | 431.6mm |
| Front-Center | 781.7mm |
| Front-Center Horizontal | 781.4mm |
| Wheelbase | 1213mm |
| Fork Offset/Rake | 43mm |
| Fork Length (Axle-To-Crown) | 589mm |
| Trail | 135.1mm very high |
| Mechanical Trail | 121.2mm |
| Wheel Flop | 53.5mm |
| Standover Height | 736mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 239.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 183mm |
Carbon 29" 180mm (flip chip low) Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1956.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 180mm |
| Rear Travel | Unknown |
| Suspension Sag | 0% |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 165 cm to 173 cm |
Source:https://salsacycles.com/bikes/cassidy/2021_cassidy_carbon_gx_eagle