2020 Yeti Cycles SB130 Frameset M
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 615mm |
| Reach | 460mm |
| Stack to Reach Ratio | 1.34:1 |
| Seat Tube Length, C-T | 410mm |
| Top Tube Length, Effective/Horizontal HT Top | 602mm |
| Head Tube Angle | 65.5deg |
| Effective Seat Tube Angle, ETT HT Top | 77deg |
| Head Tube Length | 99mm |
| Bottom Bracket Drop | 34mm |
| Bottom Bracket Height | 338mm |
| Chainstay Length Horizontal | 433mm |
| Front-Center | 773.8mm |
| Front-Center Horizontal | 772.6mm |
| Wheelbase | 1206mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 567.1mm |
| Trail | 121.2mm very high |
| Mechanical Trail | 110.3mm |
| Wheel Flop | 45.7mm |
| Standover Height | 725.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 231.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 168mm |
Frameset Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1949.9mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | Unknown |
| Suspension Sag | 30% |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 165 cm to 180 cm |
Source:https://yeticycles.com/bikes/sb130