2020 Merida Bikes BIG.NINE 20-D XXL / 56cm
Build
700C/29 in × 2.2 in
Insights
Very upright stack and reach vs trend of hardtail cross-country mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 670mm |
| Reach | 445mm |
| Stack to Reach Ratio | 1.51:1 |
| Seat Tube Length, C-T | 560mm |
| Top Tube Length, Effective/Horizontal HT Top | 650mm |
| Top Tube Slope | 12.5deg |
| Head Tube Angle | 70deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 160mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 306.9mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 440.9mm |
| Front-Center | 718.6mm |
| Front-Center Horizontal | 716.1mm |
| Wheelbase | 1157mm |
| Fork Offset/Rake | 46.1mm |
| Fork Length (On-Axis) | 506mm |
| Trail | 84.5mm very high |
| Mechanical Trail | 79.4mm |
| Wheel Flop | 27.2mm |
| Standover Height | 851mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 176.7mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 131.9mm |
20-D Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.2in |
| Tire Outer Diameter | 733.8mm |
| Bike Length with Tires | 1890.8mm |
| Crank Length | 175mm |
| Handlebar Width | 690mm |
| Stem Length | 110mm |
| Stem Angle | 6deg |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 6 ft 4 in to |
Source:https://www.merida-bikes.com/en/bike/571/bignine-20-d