2020 Merida Bikes One Twenty Base M
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 607.1mm |
| Reach | 435mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, C-T | 440mm |
| Top Tube Length, Effective/Horizontal Unknown | 592mm |
| Top Tube Slope | 18.4deg |
| Head Tube Angle | 67.3deg |
| Seat Tube Angle | 75.5deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 40mm |
| Bottom Bracket Height | 332mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 433.2mm |
| Front-Center | 728.6mm |
| Front-Center Horizontal | 727.5mm |
| Wheelbase | 1160.7mm |
| Fork Offset/Rake | 42mm |
| Fork Length (Axle-To-Crown) | 541mm |
| Trail | 110.1mm very high |
| Mechanical Trail | 101.5mm |
| Wheel Flop | 39.2mm |
| Standover Height | 729.6mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 181.7mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 157mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1904.6mm |
| Crank Length | 175mm |
| Handlebar Width | 760mm |
| Stem Length | 50mm |
| Stem Angle | 0deg |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 130mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 167 cm to 183 cm |
Source:https://www.merida-bikes.com/en/bike/532/one-twenty-9-7000