2019 Yeti Cycles SB140 T1 LG
Build
650B/27.5 in × 2.6 in
Insights
Somewhat aggressive stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 609.9mm |
| Reach | 480.1mm |
| Stack to Reach Ratio | 1.27:1 |
| Seat Tube Length, C-T | 450mm |
| Top Tube Length, Effective/Horizontal HT Top | 621.5mm |
| Head Tube Angle | 65deg |
| Effective Seat Tube Angle, ETT HT Top | 77deg |
| Head Tube Length | 126.4mm |
| Bottom Bracket Drop | 45mm |
| Bottom Bracket Height | 313mm |
| Chainstay Length Horizontal | 433mm |
| Front-Center | 801.2mm |
| Front-Center Horizontal | 799.9mm |
| Wheelbase | 1232.9mm |
| Fork Offset/Rake | 37.5mm |
| Fork Length (Axle-To-Crown) | 549.1mm |
| Trail | 125.6mm very high |
| Mechanical Trail | 113.8mm |
| Wheel Flop | 48.1mm |
| Standover Height | 712.3mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 273.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 143mm |
T1 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 716.1mm |
| Bike Length with Tires | 1949mm |
| Crank Length | 170mm |
| Handlebar Width | 780mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | Unknown |
| Suspension Sag | 25% |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Source:https://www.yeticycles.com/bikes/sb140/?guide:spec-geo