2014 Turner Bikes Burner 27.5 L
Build
650B/27.5 in × 2.25 in
Insights
Average stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Design deviates from other sizes of Turner Bikes Burner
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 614mm |
| Reach | 432mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 482mm |
| Top Tube Length, Effective/Horizontal Center | 620mm |
| Top Tube Slope | 15deg |
| Head Tube Angle | 67deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 114mm |
| Bottom Bracket Drop | 19mm |
| Bottom Bracket Height | 330.2mm |
| Chainstay Length | 447mm |
| Chainstay Length Horizontal | 446.6mm |
| Front-Center | 722mm |
| Front-Center Horizontal | 721.8mm |
| Wheelbase | 1168.4mm |
| Fork Offset/Rake | 34.2mm |
| Fork Length (Axle-To-Crown) | 540mm |
| Trail | 111mm very high |
| Mechanical Trail | 102.2mm |
| Wheel Flop | 39.9mm |
| Standover Height | 800mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 207.9mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 165.2mm |
27.5 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.25in |
| Tire Outer Diameter | 698.3mm |
| Bike Length with Tires | 1866.7mm |
| Crank Length | 165mm |
| Handlebar Width | 750mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 150mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 5 ft 10 in to 6 ft 1 in |
Source:https://www.turnerbikes.com/turner-pdf/tech/2014_Turner_Owners_Manual.pdf