2020 Marin Bikes Pine Mountain 2 S
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 626mm |
| Reach | 410mm |
| Stack to Reach Ratio | 1.53:1 |
| Seat Tube Length, C-T | 381mm |
| Top Tube Length, Effective/Horizontal Unknown | 572mm |
| Top Tube Slope | 26.8deg |
| Head Tube Angle | 66.5deg |
| Seat Tube Angle | 74.5deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 60mm |
| Bottom Bracket Height | 317mm |
| Chainstay Length | 430mm |
| Chainstay Length Horizontal | 425.8mm |
| Front-Center | 714.2mm |
| Front-Center Horizontal | 711.7mm |
| Wheelbase | 1137.5mm |
| Fork Offset/Rake | 51mm |
| Trail | 108.3mm very high |
| Mechanical Trail | 99.3mm |
| Wheel Flop | 39.6mm |
| Standover Height | 694mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 167.2mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 147mm |
2 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1891.6mm |
| Crank Length | 170mm |
| Handlebar Width | 780mm |
| Stem Length | 35mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 4 in to 5 ft 7 in |
Source:https://www.marinbikes.com/bikes/20-pine-mountain-2