2020 Ibis Cycles Inc. Ripmo V2 Base SMALL
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 609mm |
| Reach | 433mm |
| Stack to Reach Ratio | 1.41:1 |
| Seat Tube Length, C-T | 368mm |
| Top Tube Length, Effective/Horizontal Center | 573mm |
| Head Tube Angle | 64.9deg |
| Effective Seat Tube Angle, ETT HT Top | 77deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 344.5mm |
| Chainstay Length Horizontal | 435mm |
| Front-Center | 752.6mm |
| Front-Center Horizontal | 752mm |
| Wheelbase | 1187mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 567mm |
| Trail | 126.8mm very high |
| Mechanical Trail | 114.9mm |
| Wheel Flop | 48.7mm |
| Standover Height | 703mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 208.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 174.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1936mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 4 in to 5 ft 9 in |
Source:https://www.ibiscycles.com/bikes/ripmo