2019 Merida Bikes BIG.NINE LIMITED XXL
Build
700C/29 in × 2.2 in
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 661mm |
| Reach | 469mm |
| Stack to Reach Ratio | 1.41:1 |
| Seat Tube Length, C-T | 584mm |
| Top Tube Length, Effective/Horizontal Center | 665mm |
| Top Tube Slope | 9deg |
| Head Tube Angle | 70deg |
| Seat Tube Angle | 73.5deg |
| Head Tube Length | 145mm |
| Bottom Bracket Drop | 65mm |
| Bottom Bracket Height | 301.9mm |
| Chainstay Length | 433mm |
| Chainstay Length Horizontal | 428.1mm |
| Front-Center | 737.8mm |
| Front-Center Horizontal | 734.9mm |
| Wheelbase | 1163mm |
| Fork Offset/Rake | 46mm |
| Fork Length (Axle-To-Crown) | 506mm |
| Trail | 84.6mm very high |
| Mechanical Trail | 79.5mm |
| Wheel Flop | 27.2mm |
| Standover Height | 859mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 200.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 131.9mm |
LIMITED Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.2in |
| Tire Outer Diameter | 733.8mm |
| Bike Length with Tires | 1896.8mm |
| Handlebar Width | 720mm |
| Stem Angle | 6deg |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 192 cm to |
Source:https://www.merida-bikes.com/en/bike/44/bignine-limited