2019 Kona Bicycle Company Process 153 CR/DL 27.5 M
Build
650B/27.5 in × 2.3 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 607mm |
| Reach | 450mm |
| Stack to Reach Ratio | 1.35:1 |
| Seat Tube Length, C-T | 410mm |
| Top Tube Length, Effective/Horizontal HT Top | 600mm |
| Top Tube Slope | 20.9deg |
| Head Tube Angle | 66deg |
| Seat Tube Angle | 76deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 10mm |
| Bottom Bracket Height | 340.4mm |
| Chainstay Length | 425mm |
| Chainstay Length Horizontal | 424.9mm |
| Front-Center | 765mm |
| Front-Center Horizontal | 765.1mm |
| Wheelbase | 1190mm |
| Fork Offset/Rake | 46mm |
| Fork Length (On-Axis) | 552mm |
| Trail | 105.7mm very high |
| Mechanical Trail | 96.5mm |
| Wheel Flop | 39.3mm |
| Standover Height | 701mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 244.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 170.4mm |
CR/DL 27.5 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 700.8mm |
| Bike Length with Tires | 1890.8mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:http://www.konaworld.com/process_153_cr_dl_275.cfm