2019 Hope Technology HB.160 Base Large
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 615mm |
| Reach | 438.6mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, C-T | 475mm |
| Top Tube Length, Effective/Horizontal HT Top | 615mm |
| Top Tube Slope | 15.5deg |
| Head Tube Angle | 65.5deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 95.1mm |
| Bottom Bracket Drop | 15mm |
| Bottom Bracket Height | 357mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434.7mm |
| Front-Center | 760.9mm |
| Front-Center Horizontal | 760.8mm |
| Wheelbase | 1195.5mm |
| Fork Offset/Rake | 46mm |
| Fork Length (Axle-To-Crown) | 567.1mm |
| Trail | 119mm very high |
| Mechanical Trail | 108.3mm |
| Wheel Flop | 44.9mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 219mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 187mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1939.4mm |
| Handlebar Width | 780mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.hopetechhb.com/hb-160