2019 Yeti Cycles SB100 Base SM
Build
700C/29 in × 2.3 in
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Yeti Cycles SB100
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 602mm |
| Reach | 407.1mm |
| Stack to Reach Ratio | 1.48:1 |
| Seat Tube Length, C-T | 393mm |
| Top Tube Length, Effective/Horizontal HT Top | 576.7mm |
| Top Tube Slope | 23.5deg |
| Head Tube Angle | 67.8deg |
| Seat Tube Angle | 74.3deg |
| Head Tube Length | 96.2mm |
| Bottom Bracket Drop | 37.4mm |
| Bottom Bracket Height | 332mm |
| Chainstay Length Horizontal | 437.2mm |
| Front-Center | 686.1mm |
| Front-Center Horizontal | 685.2mm |
| Wheelbase | 1122.3mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 530.2mm |
| Trail | 103.2mm very high |
| Mechanical Trail | 95.6mm |
| Wheel Flop | 36.1mm |
| Standover Height | 724mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 146.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 162mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 738.8mm |
| Bike Length with Tires | 1861.1mm |
| Crank Length | 170mm |
| Handlebar Width | 760mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | Unknown |
| Suspension Sag | 33% |
| Frame Material | Carbon/Composite |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 155 cm to 170 cm |
Source:https://www.yeticycles.com/bikes/sb100/features?guide:spec-geo