2020 Yeti Cycles SB165 C1 MD
Build
650B/27.5 in × 2.4 in
Insights
Somewhat aggressive stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 599.9mm |
| Reach | 460.1mm |
| Stack to Reach Ratio | 1.3:1 |
| Seat Tube Length, C-T | 410mm |
| Top Tube Length, Effective/Horizontal HT Top | 598.5mm |
| Top Tube Slope | 19.9deg |
| Head Tube Angle | 63.5deg |
| Seat Tube Angle | 77deg |
| Head Tube Length | 110.4mm |
| Bottom Bracket Drop | 8.1mm |
| Bottom Bracket Height | 344.9mm |
| Chainstay Length Horizontal | 433mm |
| Front-Center | 797.2mm |
| Front-Center Horizontal | 797.2mm |
| Wheelbase | 1230.2mm |
| Fork Offset/Rake | 37.5mm |
| Fork Length (Axle-To-Crown) | 569.1mm |
| Trail | 134.1mm very high |
| Mechanical Trail | 120mm |
| Wheel Flop | 53.5mm |
| Standover Height | 716.3mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 274.3mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 174.9mm |
C1 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 705.9mm |
| Bike Length with Tires | 1936.1mm |
| Crank Length | 170mm |
| Handlebar Width | 780mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 180mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 165 cm to 180 cm |
Source:https://www.yeticycles.com/bikes/sb165/?guide:spec-geo