Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of retrotec Funduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Geometry
Stack | 661mm | — |
Reach | 475mm | — |
Stack to Reach Ratio | 1.39:1 | — |
Seat Tube Length, Unknown | 455mm | — |
Top Tube Length, Effective/Horizontal Center | 669mm | — |
Top Tube Slope | 20.4deg | — |
Head Tube Angle | 65.5deg | — |
Seat Tube Angle | 74deg | — |
Head Tube Length | 115mm | — |
Bottom Bracket Drop | 59mm | — |
Bottom Bracket Height | 318mm | — |
Chainstay Length | 446mm | — |
Chainstay Length Horizontal | 442.1mm | — |
Front-Center | 800mm | — |
Front-Center Horizontal | 797.8mm | — |
Wheelbase | 1239.9mm | — |
Fork Offset/Rake | 140mm | — |
Trail | 18mm very low | — — |
Mechanical Trail | 16.4mm | — |
Wheel Flop | 6.8mm | — |
Standover Height | 851mm | — |
Tire to Pedal Spindle | 253mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 148mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.6in | — |
Tire Outer Diameter | 754.1mm | — |
Bike Length with Tires | 1994mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Steel | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://ingliscycles.com/products/funduro-production | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |