Bike-on-Bike
3
No Diagram
Default Config
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Norco Range VLT CX
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 640mm | — |
Reach | 466mm | — |
Stack to Reach Ratio | 1.37:1 | — |
Seat Tube Length, C-T | 415mm | — |
Top Tube Length, Effective/Horizontal Unknown | 613mm | — |
Head Tube Angle | 63.5deg | — |
Head Tube Length | 125mm | — |
Bottom Bracket Drop | 20.5mm | — |
Bottom Bracket Height | 350.2mm | — |
Chainstay Length | 436mm | — |
Chainstay Length Horizontal | 435.5mm | — |
Front-Center | 825.7mm | — |
Front-Center Horizontal | 825.5mm | — |
Wheelbase | 1261mm | — |
Fork Offset/Rake | 44mm | — |
Trail | 135.7mm very high | — — |
Mechanical Trail | 121.4mm | — |
Wheel Flop | 54.2mm | — |
Standover Height | 711mm | — |
Tire to Pedal Spindle | 290.1mm 165 mm cranks | — |
Pedal Spindle to Ground Clearance | 185.2mm 165 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.35in | — |
Tire Outer Diameter | 741.4mm | — |
Bike Length with Tires | 2002.4mm | — |
Crank Length | 165mm | — |
Stem Length | 40mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | Unknown | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
| Features | E-bike | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bikes/e-mountain/e-enduro/range-vlt-cx/2026-range-vlt-cx-c1/?srsltid=AfmBOorc3sIdTdm9yw3pQgt3SHlJqpGkXybSO6Mwc1hNMf6mP7N3g_nC | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |