Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Intense Cycles Carbine 29
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 632mm | — |
Reach | 416mm | — |
Stack to Reach Ratio | 1.52:1 | — |
Seat Tube Length, C-T | 457mm | — |
Top Tube Length, Effective/Horizontal Center | 597mm | — |
Top Tube Slope | 19.5deg | — |
Head Tube Angle | 67deg | — |
Seat Tube Angle | 72deg | — |
Head Tube Length | 102mm | — |
Bottom Bracket Drop | 23mm | — |
Bottom Bracket Height | 349mm | — |
Chainstay Length | 451mm | — |
Chainstay Length Horizontal | 450.4mm | — |
Front-Center | 718mm | — |
Front-Center Horizontal | 717.6mm | — |
Wheelbase | 1168mm | — |
Fork Offset/Rake | 51mm | — |
Fork Length (Axle-To-Crown) | 570mm | — |
Trail | 102.5mm very high | — — |
Mechanical Trail | 94.3mm | — |
Wheel Flop | 36.9mm | — |
Standover Height | 827mm | — |
Tire to Pedal Spindle | 176mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 179mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 743.9mm | — |
Bike Length with Tires | 1911.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 140mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | Intensecycles | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |