Bike-on-Bike
Default Config
Insights
Very upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Intense Cycles Carbine 29
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 658mm | — |
Reach | 474mm | — |
Stack to Reach Ratio | 1.39:1 | — |
Seat Tube Length, C-T | 540mm | — |
Top Tube Length, Effective/Horizontal Center | 648mm | — |
Top Tube Slope | 12.7deg | — |
Head Tube Angle | 67deg | — |
Seat Tube Angle | 72deg | — |
Head Tube Length | 120mm | — |
Bottom Bracket Drop | -273.5mm | — |
Bottom Bracket Height | 349mm | — |
Chainstay Length | 451mm | — |
Chainstay Length Horizontal | 358.6mm | — |
Front-Center | 902.9mm | — |
Front-Center Horizontal | 860.4mm | — |
Wheelbase | 1219mm | — |
Fork Offset/Rake | 51mm | — |
Fork Length (Axle-To-Crown) | 570mm | — |
Trail | -23.4mm | — — |
Mechanical Trail | -21.5mm | — |
Wheel Flop | -8.4mm | — |
Standover Height | 852mm | — |
Tire to Pedal Spindle | 657.4mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 179mm 170 mm cranks | — |
Build
Wheel Size | 29mm BSD 29 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 150.9mm | — |
Bike Length with Tires | 1369.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 140mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://intensecycles.com/pages/carbine-manuals | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |