Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Charger A1
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 633mm | — |
Reach | 450mm | — |
Stack to Reach Ratio | 1.41:1 | — |
Seat Tube Length, C-T | 400mm | — |
Top Tube Length, Effective/Horizontal HT Top | 617mm | — |
Head Tube Angle | 65deg | — |
Effective Seat Tube Angle, ETT HT Top | 75.25deg | — |
Head Tube Length | 120mm | — |
Bottom Bracket Drop | 54mm | — |
Bottom Bracket Height | 318mm | — |
Chainstay Length | 430mm | — |
Chainstay Length Horizontal | 426.6mm | — |
Front-Center | 778.3mm | — |
Front-Center Horizontal | 776.4mm | — |
Wheelbase | 1203mm | — |
Fork Offset/Rake | 51mm | — |
Fork Length (Axle-To-Crown) | 542mm | — |
Trail | 117.2mm very high | — — |
Mechanical Trail | 106.2mm | — |
Wheel Flop | 44.9mm | — |
Standover Height | 667mm | — |
Tire to Pedal Spindle | 236.3mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 148mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 743.9mm | — |
Bike Length with Tires | 1946.9mm | — |
Crank Length | 170mm | — |
Handlebar Width | 780mm | — |
Stem Length | 40mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bikes/mountain/cross-country/charger/25-charger-a1/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |