Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Charger A1
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 617mm | — |
Reach | 420mm | — |
Stack to Reach Ratio | 1.47:1 | — |
Seat Tube Length, C-T | 370mm | — |
Top Tube Length, Effective/Horizontal HT Top | 585mm | — |
Head Tube Angle | 65deg | — |
Effective Seat Tube Angle, ETT HT Top | 75deg | — |
Head Tube Length | 140mm | — |
Bottom Bracket Drop | 34mm | — |
Bottom Bracket Height | 319mm | — |
Chainstay Length | 425mm | — |
Chainstay Length Horizontal | 423.6mm | — |
Front-Center | 739.1mm | — |
Front-Center Horizontal | 738.4mm | — |
Wheelbase | 1162mm | — |
Fork Offset/Rake | 42mm | — |
Fork Length (Axle-To-Crown) | 542mm | — |
Trail | 118.3mm very high | — — |
Mechanical Trail | 107.2mm | — |
Wheel Flop | 45.3mm | — |
Standover Height | 616mm | — |
Tire to Pedal Spindle | 216.2mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 149mm 170 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 705.9mm | — |
Bike Length with Tires | 1867.9mm | — |
Crank Length | 170mm | — |
Handlebar Width | 780mm | — |
Stem Length | 40mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bikes/mountain/cross-country/charger/25-charger-a1/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |