Bike-on-Bike
Default Config
Insights
Very upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of FRAMEWORKS Racing Enduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 663.9mm | — |
Reach | 480mm | — |
Stack to Reach Ratio | 1.38:1 | — |
Seat Tube Length, Unknown | 400mm | — |
Top Tube Slope | 26.1deg | — |
Head Tube Angle | 63.75deg | — |
Seat Tube Angle | 79.5deg | — |
Head Tube Length | 130mm | — |
Bottom Bracket Drop | 37mm | — |
Bottom Bracket Height | 318.5mm | — |
Chainstay Length | 455mm | — |
Chainstay Length Horizontal | 453.5mm | — |
Front-Center | 840.2mm | — |
Front-Center Horizontal | 839.4mm | — |
Wheelbase | 1292.9mm | — |
Fork Offset/Rake | 44mm | — |
Fork Length, Unknown | 587.7mm | — |
Trail | 126.3mm very high | — — |
Mechanical Trail | 113.2mm | — |
Wheel Flop | 50.1mm | — |
Standover Height | 733mm | — |
Tire to Pedal Spindle | 314.7mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 148.5mm 170 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.5in | — |
Tire Outer Diameter | 711mm | — |
Bike Length with Tires | 2003.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | Unknown | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://rideframeworks.com/pages/enduro-bike-frame | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |