Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 654mm | — |
Reach | 540mm | — |
Stack to Reach Ratio | 1.21:1 | — |
Seat Tube Length, C-T | 477mm | — |
Top Tube Length, Actual C-C | 685mm | — |
Top Tube Slope | 16.3deg | — |
Head Tube Angle | 64.5deg | — |
Seat Tube Angle | 77.5deg | — |
Head Tube Length | 140mm | — |
Bottom Bracket Drop | 24mm | — |
Bottom Bracket Height | 346.7mm | — |
Chainstay Length | 440mm | — |
Chainstay Length Horizontal | 439.3mm | — |
Front-Center | 890mm | — |
Front-Center Horizontal | 889.7mm | — |
Wheelbase | 1329mm | — |
Fork Offset/Rake | 44.4mm | — |
Trail | 127.7mm very high | — — |
Mechanical Trail | 115.2mm | — |
Wheel Flop | 49.6mm | — |
Standover Height | 784mm | — |
Tire to Pedal Spindle | 349.3mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 176.7mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.35in | — |
Tire Width Max | 2.5in | — |
Tire Outer Diameter | 741.4mm | — |
Bike Length with Tires | 2070.4mm | — |
Crank Length | 170mm | — |
Handlebar Width | 800mm | — |
Stem Length | 50mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 150mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | — | |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |