Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 622mm | — |
Reach | 456mm | — |
Stack to Reach Ratio | 1.36:1 | — |
Seat Tube Length, C-T | 400mm | — |
Top Tube Length, Actual C-C | 605mm | — |
Top Tube Slope | 23deg | — |
Head Tube Angle | 64.5deg | — |
Seat Tube Angle | 76.5deg | — |
Head Tube Length | 95mm | — |
Bottom Bracket Drop | 33mm | — |
Bottom Bracket Height | 337.7mm | — |
Chainstay Length | 435mm | — |
Chainstay Length Horizontal | 433.8mm | — |
Front-Center | 786mm | — |
Front-Center Horizontal | 785.3mm | — |
Wheelbase | 1219mm | — |
Fork Offset/Rake | 43.6mm | — |
Trail | 128.5mm very high | — — |
Mechanical Trail | 116mm | — |
Wheel Flop | 49.9mm | — |
Standover Height | 734mm | — |
Tire to Pedal Spindle | 250.3mm 165 mm cranks | — |
Pedal Spindle to Ground Clearance | 172.7mm 165 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.35in | — |
Tire Outer Diameter | 741.4mm | — |
Bike Length with Tires | 1960.4mm | — |
Crank Length | 165mm | — |
Handlebar Width | 800mm | — |
Stem Length | 40mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 150mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.ibiscycles.com/bikes/ripmo | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |