Bike-on-Bike
Default Config
Insights
Design deviates from other sizes of Cannondale Bikes habit 4
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Geometry
Stack | 63.2mm | — |
Reach | 45.5mm | — |
Stack to Reach Ratio | 1.39:1 | — |
Seat Tube Length, C-T | 40mm | — |
Top Tube Length, Effective/Horizontal HT Top | 59mm | — |
Top Tube Length, Effective/Horizontal Unknown | 55.4mm | — |
Top Tube Slope | 23.4deg | — |
Head Tube Angle | 65.5deg | — |
Seat Tube Angle | 71deg | — |
Effective Seat Tube Angle, Unknown | 77.5deg | — |
Head Tube Length | 12mm | — |
Bottom Bracket Drop | 3.8mm | — |
Bottom Bracket Height | 71.7mm | — |
Chainstay Length | 43.5mm | — |
Chainstay Length Horizontal | 43.3mm | — |
Front-Center | 76.7mm | — |
Front-Center Horizontal | 76.7mm | — |
Wheelbase | 120mm | — |
Fork Offset/Rake | 4.2mm | — |
Trail | 29.8mm very low | — — |
Mechanical Trail | 27.1mm | — |
Wheel Flop | 11.2mm | — |
Standover Height | 73.5mm | — |
Tire to Pedal Spindle | -168.8mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | -98.3mm 170 mm cranks | — |
Build
Wheel Size | 29mm BSD 29 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 150.9mm | — |
Bike Length with Tires | 270.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Swept Back Bar | — |
| Fork Travel | Unknown | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.cannondale.com/en-us/bikes/mountain/trail-bikes/habit/habit-4 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |