Bike-on-Bike
X-Large (High)
Default Config
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Niner Bikes JET 9 RDO
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Geometry
Stack | 640mm | — |
Reach | 500mm | — |
Stack to Reach Ratio | 1.28:1 | — |
Seat Tube Length, C-T | 496mm | — |
Top Tube Length, Effective/Horizontal Center | 660mm | — |
Top Tube Slope | 14.4deg | — |
Head Tube Angle | 66.5deg | — |
Seat Tube Angle | 76deg | — |
Head Tube Length | 140mm | — |
Bottom Bracket Drop | 33mm | — |
Bottom Bracket Height | -15.9mm | — |
Chainstay Length | 430mm | — |
Chainstay Length Horizontal | 428.7mm | — |
Front-Center | 806mm | — |
Front-Center Horizontal | 812.3mm | — |
Wheelbase | 1241mm | — |
Fork Offset/Rake | 44mm | — |
Trail | -40.5mm | — — |
Mechanical Trail | -37.2mm | — |
Wheel Flop | -14.8mm | — |
Standover Height | 778mm | — |
Tire to Pedal Spindle | 613.9mm 175 mm cranks | — |
Pedal Spindle to Ground Clearance | -190.9mm 175 mm cranks | — |
Build
Wheel Size | 29mm BSD 29 mm BSD | — — |
Tire Width | 2.6mm | — |
Tire Outer Diameter | 34.2mm | — |
Bike Length with Tires | 1275.2mm | — |
Crank Length | 175mm | — |
Stem Length | 35mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | 120mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.ninerbikes.com/jet-9-rdo/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |