Bike-on-Bike
Medium (Low)
Default Config
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Niner Bikes JET 9 RDO
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Geometry
Stack | 617mm | — |
Reach | 444mm | — |
Stack to Reach Ratio | 1.39:1 | — |
Seat Tube Length, C-T | 406mm | — |
Top Tube Length, Effective/Horizontal Center | 605mm | — |
Top Tube Slope | 22.3deg | — |
Head Tube Angle | 66deg | — |
Seat Tube Angle | 75.5deg | — |
Head Tube Length | 110mm | — |
Bottom Bracket Drop | 41mm | — |
Bottom Bracket Height | -23.9mm | — |
Chainstay Length | 432mm | — |
Chainstay Length Horizontal | 430.1mm | — |
Front-Center | 748mm | — |
Front-Center Horizontal | 750mm | — |
Wheelbase | 1180mm | — |
Fork Offset/Rake | 44mm | — |
Trail | -40.5mm | — — |
Mechanical Trail | -37mm | — |
Wheel Flop | -15.1mm | — |
Standover Height | 705mm | — |
Tire to Pedal Spindle | 560.9mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | -193.9mm 170 mm cranks | — |
Build
Wheel Size | 29mm BSD 29 mm BSD | — — |
Tire Width | 2.6mm | — |
Tire Outer Diameter | 34.2mm | — |
Bike Length with Tires | 1214.2mm | — |
Crank Length | 170mm | — |
Stem Length | 35mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | 120mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.ninerbikes.com/jet-9-rdo/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |