Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Yeti Cycles SB140LR
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 655mm | — |
Reach | 520mm | — |
Stack to Reach Ratio | 1.26:1 | — |
Seat Tube Length, C-T | 485mm | — |
Top Tube Length, Effective/Horizontal Center | 671mm | — |
Top Tube Slope | 16.1deg | — |
Head Tube Angle | 65deg | — |
Seat Tube Angle | 73.3deg | — |
Effective Seat Tube Angle, Unknown | 77deg | — |
Head Tube Length | 134mm | — |
Bottom Bracket Drop | 33mm | — |
Bottom Bracket Height | 341.5mm | — |
Chainstay Length | 444mm | — |
Chainstay Length Horizontal | 442.8mm | — |
Front-Center | 860mm | — |
Front-Center Horizontal | 861.2mm | — |
Wheelbase | 1304mm | — |
Fork Offset/Rake | 44mm | — |
Fork Length (Axle-To-Crown) | 575mm | — |
Trail | 126.1mm very high | — — |
Mechanical Trail | 114.3mm | — |
Wheel Flop | 48.3mm | — |
Standover Height | 744mm | — |
Tire to Pedal Spindle | 315.5mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 171.5mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.5in | — |
Tire Outer Diameter | 749mm | — |
Bike Length with Tires | 2053mm | — |
Crank Length | 170mm | — |
Handlebar Width | 780mm | — |
Stem Length | 50mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Swept Back Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 140mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://yeticycles.com/bikes/sb140 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |