Bike-on-Bike
Default Config
Insights
Somewhat aggressive stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Yeti Cycles SB135
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 600mm | — |
Reach | 455mm | — |
Stack to Reach Ratio | 1.32:1 | — |
Seat Tube Length, Unknown | 400mm | — |
Top Tube Length, Effective/Horizontal Center | 599mm | — |
Top Tube Slope | 21.1deg | — |
Head Tube Angle | 65deg | — |
Seat Tube Angle | 76.5deg | — |
Head Tube Length | 107mm | — |
Bottom Bracket Drop | 0mm | — |
Bottom Bracket Height | 355.5mm | — |
Chainstay Length | 433mm | — |
Chainstay Length Horizontal | 433mm | — |
Front-Center | 770mm | — |
Front-Center Horizontal | 770mm | — |
Wheelbase | 1203mm | — |
Fork Offset/Rake | 37mm | — |
Fork Length (Axle-To-Crown) | 558mm | — |
Trail | 125mm very high | — — |
Mechanical Trail | 113.2mm | — |
Wheel Flop | 47.9mm | — |
Standover Height | 718mm | — |
Tire to Pedal Spindle | 244.5mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 185.5mm 170 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.5in | — |
Tire Outer Diameter | 711mm | — |
Bike Length with Tires | 1914mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 135mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://yeticycles.com/bikes/sb135 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |