Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Geometry
Stack | 629mm | — |
Reach | 420mm | — |
Stack to Reach Ratio | 1.5:1 | — |
Seat Tube Length, C-T | 381mm | — |
Top Tube Length, Effective/Horizontal Center | 588.5mm | — |
Top Tube Slope | 26.7deg | — |
Head Tube Angle | 66deg | — |
Seat Tube Angle | 75deg | — |
Head Tube Length | 95mm | — |
Bottom Bracket Drop | 60mm | — |
Bottom Bracket Height | 317mm | — |
Chainstay Length | 430mm | — |
Chainstay Length Horizontal | 425.8mm | — |
Front-Center | 721.7mm | — |
Front-Center Horizontal | 719.2mm | — |
Wheelbase | 1145mm | — |
Fork Offset/Rake | 44mm | — |
Trail | 119.7mm very high | — — |
Mechanical Trail | 109.4mm | — |
Wheel Flop | 44.5mm | — |
Standover Height | 697.6mm | — |
Tire to Pedal Spindle | 174.7mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 147mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.6in | — |
Tire Outer Diameter | 754.1mm | — |
Bike Length with Tires | 1899.1mm | — |
Crank Length | 170mm | — |
Handlebar Width | 780mm | — |
Stem Length | 35mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 120mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Steel | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.marinbikes.com/bikes/2023-pine-mountain-1 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |