Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Yeti Cycles SB160
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Swept Back Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 635mm | — |
Reach | 510mm | — |
Stack to Reach Ratio | 1.25:1 | — |
Seat Tube Length, Unknown | 470mm | — |
Top Tube Length, Effective/Horizontal Center | 651mm | — |
Top Tube Slope | 16deg | — |
Head Tube Angle | 64deg | — |
Seat Tube Angle | 73.1deg | — |
Effective Seat Tube Angle, Unknown | 77.5deg | — |
Head Tube Length | 118mm | — |
Bottom Bracket Drop | 22mm | — |
Bottom Bracket Height | 352.5mm | — |
Chainstay Length | 443mm | — |
Chainstay Length Horizontal | 442.5mm | — |
Front-Center | 859mm | — |
Front-Center Horizontal | 859.6mm | — |
Wheelbase | 1302mm | — |
Fork Offset/Rake | 44mm | — |
Fork Length (Axle-To-Crown) | 588mm | — |
Trail | 133.7mm very high | — — |
Mechanical Trail | 120.2mm | — |
Wheel Flop | 52.7mm | — |
Standover Height | 756mm | — |
Tire to Pedal Spindle | 314.5mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 182.5mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.5in | — |
Tire Outer Diameter | 749mm | — |
Bike Length with Tires | 2051mm | — |
Crank Length | 170mm | — |
Handlebar Width | 800mm | — |
Stem Length | 50mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Swept Back Bar | — |
| Fork Travel | 170mm | — |
| Rear Travel | 160mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://yeticycles.com/bikes/sb160 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |