Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of Diamondback Bicycles Hatch 3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 645mm | — |
Reach | 443mm | — |
Stack to Reach Ratio | 1.46:1 | — |
Seat Tube Length, C-T | 530mm | — |
Top Tube Length, Effective/Horizontal Center | 640mm | — |
Top Tube Slope | 13deg | — |
Head Tube Angle | 69.5deg | — |
Seat Tube Angle | 73deg | — |
Head Tube Length | 125mm | — |
Bottom Bracket Drop | 60mm | — |
Bottom Bracket Height | 289.2mm | — |
Chainstay Length | 444mm | — |
Chainstay Length Horizontal | 439.9mm | — |
Front-Center | 712.6mm | — |
Front-Center Horizontal | 710.1mm | — |
Wheelbase | 1150mm | — |
Fork Offset/Rake | 46mm | — |
Trail | 81.4mm very high | — — |
Mechanical Trail | 76.3mm | — |
Wheel Flop | 26.7mm | — |
Standover Height | 844mm | — |
Tire to Pedal Spindle | 188.5mm 175 mm cranks | — |
Pedal Spindle to Ground Clearance | 114.2mm 175 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.25in | — |
Tire Outer Diameter | 698.3mm | — |
Bike Length with Tires | 1848.3mm | — |
Crank Length | 175mm | — |
Handlebar Width | 720mm | — |
Stem Length | 105mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 100mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | N/A | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.diamondback.com/hatch-3-4732 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |