Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Charger 2
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 591mm | — |
Reach | 376mm | — |
Stack to Reach Ratio | 1.57:1 | — |
Seat Tube Length, Unknown | 390mm | — |
Top Tube Length, Effective/Horizontal Unknown | 550mm | — |
Top Tube Slope | 24deg | — |
Head Tube Angle | 69.3deg | — |
Seat Tube Angle | 73.6deg | — |
Head Tube Length | 100mm | — |
Bottom Bracket Drop | 55mm | — |
Bottom Bracket Height | 294.2mm | — |
Chainstay Length | 435mm | — |
Chainstay Length Horizontal | 431.5mm | — |
Front-Center | 626mm | — |
Front-Center Horizontal | 624.5mm | — |
Wheelbase | 1056mm | — |
Fork Offset/Rake | 48mm | — |
Fork Length, Unknown | 487mm | — |
Trail | 80.6mm very high | — — |
Mechanical Trail | 75.4mm | — |
Wheel Flop | 26.7mm | — |
Standover Height | 706mm | — |
Tire to Pedal Spindle | 106.9mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 124.2mm 170 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.25in | — |
Tire Outer Diameter | 698.3mm | — |
Bike Length with Tires | 1754.3mm | — |
Crank Length | 170mm | — |
Handlebar Width | 750mm | — |
Stem Length | 70mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 100mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Aluminum | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bike-archives/2019/charger-2/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |