Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Charger 2
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 633mm | — |
Reach | 452mm | — |
Stack to Reach Ratio | 1.4:1 | — |
Seat Tube Length, Unknown | 510mm | — |
Top Tube Length, Effective/Horizontal Unknown | 650mm | — |
Top Tube Slope | 13.6deg | — |
Head Tube Angle | 70.25deg | — |
Seat Tube Angle | 72.6deg | — |
Head Tube Length | 115mm | — |
Bottom Bracket Drop | 63mm | — |
Bottom Bracket Height | 305.2mm | — |
Chainstay Length | 445mm | — |
Chainstay Length Horizontal | 440.5mm | — |
Front-Center | 713mm | — |
Front-Center Horizontal | 710.5mm | — |
Wheelbase | 1151mm | — |
Fork Offset/Rake | 51mm | — |
Fork Length, Unknown | 506mm | — |
Trail | 78mm high | — — |
Mechanical Trail | 73.4mm | — |
Wheel Flop | 24.8mm | — |
Standover Height | 784mm | — |
Tire to Pedal Spindle | 169.9mm 175 mm cranks | — |
Pedal Spindle to Ground Clearance | 130.2mm 175 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.25in | — |
Tire Outer Diameter | 736.3mm | — |
Bike Length with Tires | 1887.3mm | — |
Crank Length | 175mm | — |
Handlebar Width | 750mm | — |
Stem Length | 60mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 100mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Aluminum | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bike-archives/2019/charger-2/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |