Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 621.1mm | — |
Reach | 385.3mm | — |
Stack to Reach Ratio | 1.61:1 | — |
Seat Tube Length, C-T | 390mm | — |
Top Tube Length, Effective/Horizontal Center | 570mm | — |
Top Tube Length, Actual C-C | 539.6mm | — |
Top Tube Slope | 27deg | — |
Head Tube Angle | 69deg | — |
Seat Tube Angle | 70deg | — |
Effective Seat Tube Angle, Unknown | 73.5deg | — |
Head Tube Length | 110mm | — |
Bottom Bracket Drop | 55mm | — |
Bottom Bracket Height | 308.1mm | — |
Chainstay Length | 437mm | — |
Chainstay Length Horizontal | 433.5mm | — |
Front-Center | 659.6mm | — |
Front-Center Horizontal | 657.3mm | — |
Wheelbase | 1090.8mm | — |
Fork Offset/Rake | 51mm | — |
Trail | 84.8mm very high | — — |
Mechanical Trail | 79.1mm | — |
Wheel Flop | 28.4mm | — |
Standover Height | 706mm | — |
Tire to Pedal Spindle | 126.5mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 138.1mm 170 mm cranks | — |
Build
Wheel Size | 650B/27.5 in 584 mm BSD | — — |
Tire Width | 2.8in | — |
Tire Outer Diameter | 726.2mm | — |
Bike Length with Tires | 1817mm | — |
Crank Length | 170mm | — |
Handlebar Width | 780mm | — |
Stem Length | 60mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 120mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Steel | — |
| Fork Material | N/A | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://www.marinbikes.com/bikes/2018-pine-mountain-2#geometry | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |