2025 Nordest Cycles Albarda 3 Base

	YE	M	ML	L
Stack	586mm	600mm	610mm	623mm
Reach	369mm	382mm	390mm	398mm
Stack to Reach Ratio	1.59:1	1.57:1	1.56:1	1.57:1
Seat Tube Length, C-T	480mm	500mm	520mm	545mm
Top Tube Length, Effective/Horizontal HT Top	537mm	554mm	565mm	576mm
Top Tube Slope	14deg	12.9deg	11.7deg	10.3deg
Head Tube Angle	69.5deg	69.5deg	69.5deg	69.5deg
Seat Tube Angle	74deg	74deg	74deg	74deg
Head Tube Length	140mm	155mm	165mm	180mm
Bottom Bracket Drop	85mm	85mm	85mm	85mm
Bottom Bracket Height	276mm	276mm	276mm	276mm
Chainstay Length	420mm	420mm	420mm	420mm
Chainstay Length Horizontal	411.3mm	411.3mm	411.3mm	411.3mm
Front-Center	617.6mm	636.4mm	647.3mm	660.2mm
Front-Center Horizontal	611.7mm	630.7mm	641.7mm	654.7mm
Wheelbase	1023mm	1042mm	1053mm	1066mm
Fork Offset/Rake	51.9mm	52.6mm	51.9mm	52mm
Fork Length (Axle-To-Crown)	400mm	400mm	400mm	400mm
Trail	79.6mm high	78.8mm high	79.6mm high	79.4mm high
Mechanical Trail	74.6mm	73.8mm	74.5mm	74.4mm
Wheel Flop	26.1mm	25.9mm	26.1mm	26.1mm
Tire to Pedal Spindle	86.6mm 170 mm cranks	105.4mm 170 mm cranks	116.3mm 170 mm cranks	129.2mm 170 mm cranks
Pedal Spindle to Ground Clearance	106mm 170 mm cranks	106mm 170 mm cranks	106mm 170 mm cranks	106mm 170 mm cranks

Very Upright

Somewhat Upright

Average

Somewhat Aggressive

Very Aggressive

The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.

Category Trend

Source:https://nordestcycles.com/en/product/albarda-3-frame

Geometry