2020 Lennox Custom Cycles Daily Grind 650b wheels

	52cm	54cm	56cm	58cm
Stack	561mm	582mm	593mm	599mm
Reach	357mm	366mm	378mm	391mm
Stack to Reach Ratio	1.57:1	1.59:1	1.57:1	1.53:1
Seat Tube Length, Unknown	503mm	533mm	544mm	549mm
Top Tube Length, Effective/Horizontal Center	525mm	545mm	560mm	575mm
Top Tube Slope	9deg	7.9deg	7.7deg	7.6deg
Head Tube Angle	71.2deg	71.3deg	72deg	72deg
Seat Tube Angle	73.5deg	73deg	73deg	73deg
Head Tube Length	120mm	140mm	150mm	160mm
Bottom Bracket Drop	75mm	75mm	73mm	70mm
Bottom Bracket Height	264mm	264mm	266mm	269mm
Chainstay Length	430mm	430mm	432mm	435mm
Chainstay Length Horizontal	423.4mm	423.4mm	425.8mm	429.3mm
Front-Center	580mm	595mm	599mm	614mm
Front-Center Horizontal	575.1mm	590.3mm	594.5mm	610mm
Wheelbase	998.5mm	1013.7mm	1020.3mm	1039.3mm
Fork Offset/Rake	49.9mm	49.9mm	45.3mm	44.8mm
Trail	62.7mm mid/neutral	62.1mm mid/neutral	62.6mm mid/neutral	63mm mid/neutral
Mechanical Trail	59.4mm	58.8mm	59.5mm	60mm
Wheel Flop	19.1mm	18.9mm	18.4mm	18.5mm
Tire to Pedal Spindle	71mm 170 mm cranks	86mm 170 mm cranks	90mm 170 mm cranks	105mm 170 mm cranks
Pedal Spindle to Ground Clearance	94mm 170 mm cranks	94mm 170 mm cranks	96mm 170 mm cranks	99mm 170 mm cranks

Very Upright

Somewhat Upright

Average

Somewhat Aggressive

Very Aggressive

The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.

Category Trend

Source:https://www.lennoxcustomcycles.co.uk/products/daily-grind-frameset

Geometry