2020 idworx Bikes Rohler BLT Base
- Category
- Rigid MTB
- Design
- Flat Bar, Rigid, non-suspension corrected
- Frame
- Aluminum
- Fork
- Aluminum
Geometry
46 | 51 | 56 | |
Stack | 587mm | 623mm | 658mm |
Reach | 424mm | 427mm | 430mm |
Stack to Reach Ratio | 1.38:1 | 1.46:1 | 1.53:1 |
Seat Tube Length, Unknown | 460mm | 510mm | 560mm |
Top Tube Length, Effective/Horizontal HT Top | 600mm | 620mm | 640mm |
Top Tube Slope | 14.7deg | 13.2deg | 11.7deg |
Head Tube Angle | 71deg | 71deg | 71deg |
Seat Tube Angle | 73.5deg | 73deg | 72.5deg |
Head Tube Length | 140mm | 178mm | 220mm |
Bottom Bracket Drop | 60mm | 60mm | 55mm |
Bottom Bracket Height | 302mm | 302mm | 307mm |
Chainstay Length | 471mm | 471mm | 471mm |
Chainstay Length Horizontal | 467.2mm | 467.2mm | 467.8mm |
Front-Center | 655.8mm | 671.1mm | 687.4mm |
Front-Center Horizontal | 653.1mm | 668.5mm | 685.2mm |
Wheelbase | 1120.2mm | 1135.6mm | 1153mm |
Fork Offset/Rake | 45mm | 45mm | 45mm |
Trail | 77.1mm high | 77.1mm high | 77.1mm high |
Mechanical Trail | 72.9mm | 72.9mm | 72.9mm |
Wheel Flop | 23.7mm | 23.7mm | 23.7mm |
Tire to Pedal Spindle | 123.8mm 170 mm cranks | 139.1mm 170 mm cranks | 155.4mm 170 mm cranks |
Pedal Spindle to Ground Clearance | 132mm 170 mm cranks | 132mm 170 mm cranks | 137mm 170 mm cranks |
Base Build
46 | 51 | 56 | |
Wheel Size | 650B/27.5 in 584 mm BSD | 650B/27.5 in 584 mm BSD | 650B/27.5 in 584 mm BSD |
Tire Width | 70mm | 70mm | 70mm |
Tire Outer Diameter | 724mm | 724mm | 724mm |
Bike Length with Tires | 1844.2mm | 1859.6mm | 1877mm |
Stack and Reach vs. Category Trend
Very Upright
Somewhat Upright
Average
Somewhat Aggressive
Very Aggressive
The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.
Learn more about the Upright/Aggressive ScaleCategory Trend
Rigid MTBSource:https://www.idworx-bikes.de/geometry