2022 Hope Technology HB.160 Base
- Design
- Flat Bar, Full suspension
- Frame
- Carbon/Composite
- Suspension
- 170mm fork travel, 160mm rear travel
- Features
- Disc brake
Geometry
H2 | H3 (slack) | |
Stack | 637mm | 645mm |
Reach | 470mm | 487mm |
Stack to Reach Ratio | 1.36:1 | 1.32:1 |
Seat Tube Length, Unknown | 410mm | 440mm |
Top Tube Length, Effective/Horizontal Unknown | 606.5mm | 628mm |
Top Tube Slope | 22.7deg | — |
Head Tube Angle | 64deg | 63.2deg |
Seat Tube Angle | 75.5deg | — |
Seat Tube Angle, Unknown | — | 78deg |
Head Tube Length | 110mm | 120mm |
Bottom Bracket Drop | 30mm | 31.5mm |
Bottom Bracket Height | 344.5mm | 340.5mm |
Chainstay Length | 440mm | 440mm |
Chainstay Length Horizontal | 439mm | 438.9mm |
Front-Center | 815.6mm | 848.2mm |
Front-Center Horizontal | 815mm | 847.6mm |
Wheelbase | 1254mm | 1286.5mm |
Fork Offset/Rake | 44mm | 44mm |
Trail | 133.7mm very high | 138.6mm very high |
Mechanical Trail | 120.2mm | 123.7mm |
Wheel Flop | 52.7mm | 55.8mm |
Standover Height | 710mm | 725mm |
Tire to Pedal Spindle | 271.1mm 170 mm cranks | 306.3mm 170 mm cranks |
Pedal Spindle to Ground Clearance | 174.5mm 170 mm cranks | 170.5mm 170 mm cranks |
Base Build
H2 | H3 (slack) | |
Wheel Size | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD |
Tire Width | 2.5in | 2.4in |
Tire Outer Diameter | 749mm | 743.9mm |
Bike Length with Tires | 2003mm | 2030.4mm |
Published Sizing Recommendations
Height | 5 ft 7 in to 6 ft 0 in | 5 ft 11 in to 6 ft 4 in |
Stack and Reach vs. Category Trend
Very Upright
Somewhat Upright
Average
Somewhat Aggressive
Very Aggressive
The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.
Learn more about the Upright/Aggressive ScaleCategory Trend
Full-suspension All-mountain/Enduro MTBSource:https://www.hopetechhb.com/geometry-916